How to Make the Vacuum Cleaner
If you have a bit of Coca Cola left over after enjoying a cold drink, you can use it to make your own vacuum cleaner. This is an easy project that only requires a few simple materials.
The first step is to gather all of the materials you will need. You will need some newspapers, old clothes, and a vacuum cleaner hose. The newspaper will be used as the chamber insert and the old clothes will be used as the brushroll. Place the newspaper into the vacuum cleaner hose and secure it in place with a bandana or piece of cloth. Now put the brushroll on top of the newspaper and position it so that it covers both ends of the hose. plug in your vacuum cleaner and turn it on to full power. Assemble another identical assembly using fresh paper and start cleaning!
How to Make a Vacuum Cleaner from Coca Cola
In this article, we will be discussing how to make a vacuum cleaner from Coca Cola. This project is very easy and can be completed in just a few minutes. All you need is some cans of Coke, a drill, and a bolt cutters. The first step is to remove the labels from the cans. Once the labels are removed, use the drill to create a pilot hole in each can. Next, using the bolt cutters, cut around the circumference of each can. Be sure to leave enough room at the top and bottom of each can so that you can fit the vacuum cleaner hose inside of it. Now that the cans are prepared, it’s time to assemble them into the vacuum cleaner frame. Start by placing one end of the vacuum cleaner hose inside of one of the cans and then place the other end of the hose inside of another can. Make sure that both ends of the hose are secure by using bolts to attach them together. Now you’re ready to start using your new vacuum cleaner!
How to make the vacuum cleaner
Making a vacuum cleaner from Coca Cola is a fun and easy project that can be completed in just a few minutes. The materials needed are:
-A bottle of Coca Cola
-A drill bit
-An air pump
1. Open the bottle of Coca Cola and empty the contents into a bowl.
2. Use the drill bit to create a small hole in the top of the Coke bottle.
3. Insert the air pump into the hole in the top of the Coke bottle and turn it on to start inflating the bottle.
4. Once inflated, hold onto the sides of the Coke bottle and carefully lift it off of its base. Don’t attempt to remove any pieces that have been drilled out; these will stay attached to the top of your new vacuum cleaner!
5. Place your newly made vacuum cleaner on a flat surface and attach the hose attachment by screwing it onto one end of the nozzle.
That’s all there is to it! Your new vacuum cleaner is now ready for use!
The finished product
If you have a closet full of empty Coca Cola cans and a few screws, you can make your own vacuum cleaner! All you need is an empty Coke can, some screws, and a drill. First, empty the Coke can of all its contents. Next, take the screws and drill a hole in the top of the can near one end. Make sure to leave enough room for the cord to pass through without being too tight. Finally, thread the cord through the hole and tie it off at the other end. Your homemade vacuum cleaner is ready to use!
conclusion
Vacuum cleaners are a necessary household item, but they can be expensive. In this article, we will teach you how to make your own vacuum cleaner from Coca Cola.
The first step is to gather all of the materials you need. You will need a Coca Cola bottle, a knife, scissors, tape, and a vacuum cleaner hose. The next thing you will need to do is cut the top off of the Coke bottle. Be sure to cut straight down because you will need the opening for the motor. Then, use scissors to cut a hole in the bottom of the Coke bottle so that the motor can fit through it. Make sure that the hole is big enough so that the motor can move around freely. Next, take the vacuum cleaner hose and loop it around one of the handles on the Coke bottle. Make sure that the other end of the hose is attached to your vacuum cleaner. Finally, tape around both ends of the hose so that it is secure. Now you are ready to start cleaning! To clean surfaces with suction, simply move the Coke bottle along them and press down on it with your vacuum cleaner nozzle.
